FORDCROWN VICTORIA
NHTSA vehicle recall lookup

2007 FORD CROWN VICTORIA recalls

There are 4 NHTSA recall campaigns associated with this vehicle configuration.

Explore full safety analysis
Live NHTSA dataVehicle taxonomy resolved as FORD CROWN VICTORIA.
NHTSA recall campaigns4
NHTSA consumer complaints50
Primary sourceNHTSA
Most-mentioned components
STEERING:RACK AND PINION:PINION SHAFT · 1STEERING · 1VISIBILITY:WINDSHIELD · 1SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE · 1
Campaign 14V704000

Steering › Rack And Pinion › Pinion Shaft

May 11, 2014
Summary

Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.

Risk

Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.

Remedy

Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.

Open campaign page →
Campaign 13V385000

Steering

May 8, 2015
Summary

Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.

Risk

If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.

Remedy

Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.

Open campaign page →
Campaign 06V440000

Visibility › Windshield

Mar 11, 2007
Summary

CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING.' THE WINDSHIELD MAY NOT BE PROPERLY SECURED TO THE VEHICLE BODY.

Risk

IF THE WINDSHIELD IS NOT PROPERLY RETAINED TO THE VEHICLE, WIND NOISE, SQUEAK/RATTLES AND/OR WATER LEAKS MAY OCCUR. ALSO, LOSS OF WINDSHIELD RETENTION MAY REDUCE OCCUPANT PROTECTION IN THE EVENT OF A CRASH.

Remedy

DEALERS WILL REPLACE THE WINDSHIELD FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 22, 2006. OWNERS MAY CONTACT FORD AT 1-800-392-3673.

Open campaign page →
Campaign 07V183000

Service Brakes, Hydraulic › Antilock/Traction Control/Electronic Limited Slip › Control Unit/Module

Feb 4, 2009
Summary

CERTAIN PASSENGER VEHICLES EQUIPPED WITH ANTILOCK BRAKE SYSTEMS (ABS) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, "PASSENGER CAR BRAKE SYSTEMS." THE FRONT AND REAR RIGHT SIDE BRAKE LINES MAY BE REVERSED AT THE ABS HYDRAULIC CONTROL UNIT.

Risk

THE BRAKES MAY NOT OPERATE AS INTENDED, WHICH COULD RESULT IN A CRASH.

Remedy

DEALERS WILL INSPECT THE BRAKE LINE CONNECTIONS AND THE HYDRAULIC CONTROL UNIT AND REPOSITION THEM FREE OF CHARGE. THE RECALLBEGAN ON APRIL 27, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.

Open campaign page →

Does this mean my vehicle has an open recall?

No. Year/make/model results show campaigns associated with this vehicle configuration. RecallSight can decode your VIN and build the research dossier here; NHTSA remains authoritative for whether a specific VIN has an unrepaired recall.

Check a VIN on RecallSight →

What should I do?

Review the remedy and manufacturer guidance for each campaign. Safety recall remedies are generally provided by manufacturers without charge when the vehicle is covered.

Model history

See every FORD CROWN VICTORIA model year

Browse all official vPIC model years, including years RecallSight has not indexed yet, then compare the evidence as each year is loaded.

Open FORD CROWN VICTORIA model history →
Continue