2006 INTERNATIONAL 5600i recalls

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2008 HEAVY TRUCKS MANUFACTURED BETWEEN APRIL 1, 2003 AND DECEMBER 21, 2007, EQUIPPED WITH CATERPILLAR C15 ENGINES. THE VARIABLE VALVE ACTUATION (VVA) OIL LINE MAY WEAR AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK.

AN OIL LEAK COULD RESULT IN A FIRE.

NAVISTAR IS WORKING WITH CATERPILLAR TO REPAIR THE ENGINES FREE OF CHARGE. PLEASE SEE 09E-020. THE SAFETY RECALL BEGAN ON OCTOBER 23, 2009. OWNERS MAY CONTACT CATERPILLAR AT 1-800-447-4986 OR NAVISTAR AT 1-260-461-1890.

ON CERTAIN HEAVY DUTY TRUCK/TRACTORS EQUIPPED WITH ARVINMERITOR SERIES 145 AND 160 REAR DRIVE AXLES. THE SUSPECT REAR DRIVE AXLE'S SPINDLES MAY HAVE BEEN INCORRECTLY HEAT TREATED. SUCH A CONDITION LESSENS THE OVERALL STRUCTURAL INTEGRITY OF THE SPINDLES AND COULD RESULT IN ITS FRACTURE.

IF A SPINDLE FRACTURES WHILE THE VEHICLE IS IN MOTION, IT MAY CAUSE WHEEL SEPARATION, WHICH COULD, WITHOUT WARNING RESULT IN A VEHICLE CRASH.

DEALERS WILL INSPECT THE SUSPECT VEHICLES AND IF THE SPINDLES ARE FOUND TO HAVE CERTAIN DATE CODES, THE AXLE WILL BE REPLACED. THE RECALL BEGAN ON OCTOBER 7, 2005. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.

ON CERTAIN HEAVY DUTY TRUCK/TRACTORS EQUIPPED WITH SEARS ATLAS SERIES 35, 70, OR 80 DRIVER'S SEATS, WHEN THE SEATS ARE IN THEIR LOWEST, MOST REARWARD ADJUSTED POSITION, THEY MAY CHAFE THE SEAT BELT TETHER THAT CONNECTS FROM THE SEAT TO THE BACK OF THE CAB.

THIS CHAFING MAY EVENTUALLY CUT THROUGH THE TETHER, THUS WEAKENING THE EFFECTIVENESS OF THE SEAT BELT ASSEMBLY IN A VEHICLE CRASH, POSSIBLY RESULTING IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

DEALERS WILL INSPECT THE VEHICLES FOR SUSPECT SEAT CODES AND WILL REPLACE THE EXISTING 12" SEAT TETHERS WITH NEW 13.5" TETHERS. THE RECALL BEGAN ON OCTOBER 7, 2005. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.

CERTAIN TRUCKS BUILT WITH A 8X6 WHEEL CONFIGURATION (TRIDEMS) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, 'AIR BRAKE SYSTEMS.' THE AS-BUILT AIR BRAKE COMPONENT SIZE AND CONFIGURATION ARE INADEQUATE FOR THE EXTENDED WHEELBASES CAUSING THE MID-REAR AND REAR-REAR AXLE BRAKE APPLY TIMING TO BE NONCOMPLIANT WITH THE STANDARD.

THE LONGER BRAKE APPLY TIME MAY RESULT IN EXTENDED STOPPING DISTANCES, WHICH COULD RESULT IN A CRASH.

DEALERS WILL CHANGE THE AIR HOSING (TO 3/4" DIAMETER) FROM THE AIR TANK; AIR HOSING (TO 3/4") FROM THE ABS-MODULATOR VALVES TO SERVICE BRAKE QUICK RELEASE VALVES; AND THE SERVICE BRAKE QUICK RELEASE VALVES WILL BE UPGRADED WITH LARGER PORTS TO ACCOMMODATE HIGH AIR FLOW FREE OF CHARGE. THE RECALL BEGAN ON MARCH 10, 2006. OWNERS MAY CONTACT INTERNATIONAL AT 1-800-448-7825.