NAVISTAR9400
NHTSA vehicle recall lookup
1998 Navistar 9400 recalls
There are 4 NHTSA recall campaigns associated with this vehicle configuration.
Live NHTSA dataVehicle taxonomy resolved as Navistar 9400.
Most-mentioned components
SUSPENSION:FRONT:HUB · 1ELECTRICAL SYSTEM:WIRING · 1POWER TRAIN:DRIVELINE · 1SUSPENSION:FRONT:WHEEL BEARING · 1
Campaign 99V128003
Suspension › Front › Hub
Mar 7, 2000
Summary
VEHICLE DESCRIPTION: TRUCKS ASSEMBLED WITH SKF LEVEL 2 TRUCK HUB UNITS (THU) RECEIVED FROM MERITOR. THESE HUBS CAN FATIGUE CRACK.
Risk
THIS FATIGUE CRACKING CAN RESULT IN WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy
Open campaign page →
DEALERS WILL REPLACE THESE HUBS WITH PRODUCTION LEVEL 3 HUBS.
Campaign 98V117000
Electrical System › Wiring
Mar 5, 2000
Summary
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH PROSLEEPER BUNKS. A MICRO RELAY LOCATED BEHIND THE HVAC CONTROL PANEL IN THE BUNK CAN CORRODE FROM MOISTURE.
Risk
THIS CONDITION CAN RESULT IN A SHORT CIRCUIT BETWEEN CONTACTS ON THE RELAY INCREASING THE RISK OF A VEHICLE FIRE.
Remedy
Open campaign page →
DEALERS WILL REMOVE THE EXISTING RELAY AND REPLACE IT WITH A SEALED RELAY.
Campaign 98V290000
Power Train › Driveline
Sep 11, 1998
Summary
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH SPICER SPL170 55MM CENTER BERING PACKAGE. THE END YOKE RETAINING NUT CAN LOOSEN.
Risk
IF THIS CONDITION OCCURS, THE DRIVE LINE CAN VIBRATE AND SEPARATE FROM THE VEHICLE, CAUSING VEHICULAR DAMAGE, OR PERSONAL INJURY, OR BOTH.
Remedy
Open campaign page →
DEALERS WILL REMOVE THE 55MM CENTER BEARING PACKAGE AND COUPLER SHAFT, AND REPLACE IT WITH A NEW COUPLER SHAFT AND A 60MM CENTER BEARING PACKAGE. AN INTERIM REMEDY CAN BE IMPLEMENTED BY PLACING A SPOT WELD ON THE COUPLING SHAFT THREADS UNTIL PARTS ARE AVAILABLE.
Campaign 99V014002
Suspension › Front › Wheel Bearing
Mar 3, 2000
Summary
VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCK CHASSIS EQUIPPED WITH 16,000 LB., 18,000 LB., OR 20,000 LB. HEAVY DUTY STEERING AXLES. THE INNER WHEEL BEARING CONE FOR THE STEERING AXLE WHEEL HUB ASSEMBLY DOES NOT PROPERLY FIT ONTO THE NAVISTAR STEERING AXLE SPINDLE ASSEMBLY. IMPROPER FIT OF THE BEARING TO THE SPINDLE INCREASES THE STRESS LEVELS TO THE STEERING AXLE SPINDLE WHICH COULD CAUSE SPINDLE FAILURE.
Risk
IF THE SPINDLE FAILS, A LOSS OF DRIVER CONTROL COULD OCCUR, INCREASING THE RISK OF A VEHICLE CRASH.
Remedy
Open campaign page →
DEALERS WILL REMOVE THE LEFT AND RIGHT HUB/DRUM ASSEMBLIES FROM THE STEERING AXLES AND REPLACE THE INNER WHEEL BEARING CONES AND CUPS.
Does this mean my vehicle has an open recall?
No. Year/make/model results show campaigns associated with this vehicle configuration. RecallSight can decode your VIN and build the research dossier here; NHTSA remains authoritative for whether a specific VIN has an unrepaired recall.
Check a VIN on RecallSight →What should I do?
Review the remedy and manufacturer guidance for each campaign. Safety recall remedies are generally provided by manufacturers without charge when the vehicle is covered.
Model history
See every Navistar 9400 model year
Browse all official vPIC model years, including years RecallSight has not indexed yet, then compare the evidence as each year is loaded.