2019 International Hx recalls

Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

Unintended vehicle movement can increase the risk of a crash.

Navistar will notify owners, and dealers will recalibrate the Transmission Control Module (TCM), free of charge. The recall began January 18, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18518.

Navistar, Inc. (Navistar) is recalling certain 2018-2019 International HX and LT trucks equipped with a Cummins ISX engine and a Wabco 37.4 air compressor. The air compressor discharge line may contact the fuel filter inlet and outlet lines (fuel lines) and the heat generated from the air compressor discharge line may cause heat damage to the fuel lines.

Continued heat damage to the fuel lines could cause the fuel lines to rupture, resulting in a fuel leak and increasing the risk of a fire.

Navistar will notify owners, and dealers will replace the straight fitting on the air compressor discharge line and the discharge line with a 45-degree fitting and a redesigned discharge line, free of charge. The recall began on July 20, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18511.

Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.

If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.

Cummins will notify the affected owners and dealers will replace the nylon fuel line with a steel fuel line, free of charge. Navistar issued owners an interim notification on October 11, 2018. The recall began November 21, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.

Navistar, Inc. (Navistar) is recalling certain 2019 International HX, DuraStar, WorkStar, HV, LoneStar, LT, MV, and RH vehicles, and IC Bus HC, CE, and RE vehicles equipped with long stroke brake chambers and spring actuated parking brakes. The spring actuated parking brake may be improperly crimped to the long stroke service brake chamber, causing a service brake air leak and the possible separation of the spring brake chamber from the service brake section.

An air leak or separation of the spring brake chamber can increase the needed stopping distance, increasing the risk of a crash.

Navistar will notify owners, and dealers will replace the brake chamber assemblies from the suspected lot, free of charge. The recall began October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18512.

Navistar, Inc. (Navistar) is recalling certain 2017-2019 International HX severe service diesel trucks equipped with feature code 04091 (dual air brake system) and 04AZY (Antilock Brake System (ABS) with 6 channel Electronic Stability Protection (ESP)). The air supply line to the SR7 roll stability valve may have been improperly routed to the ATR6 brake control valve steer axle delivery port, when it should be connected to the ATR6 brake control valve control port.

During a stability control oversteer event when there are slippery road conditions, the parking brakes may be modulated unintentionally, potentially causing a loss of control and increasing the risk of a crash.

Navistar will notify owners, and dealers will reroute the SR7 roll stability valve supply line to the ATR6 brake control valve control port, free of charge. The recall began on June 12, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18504.

Navistar, Inc. (Navistar) is recalling certain 2018-2021 International HV, 2018-2020 International HX, 2018-2021 International LT and International RH vehicles. The connecting rod wrist pin may crack, resulting in connecting rod failure.

Connecting rod failure can cause an engine shutdown, increasing the risk of a crash.

Dealers will install new knock detection software to warn the driver prior to engine connecting rod failure, and replace connecting rods as necessary, free of charge. Owner notification letters were mailed February 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 22518.