2006 HYUNDAI AZERA recalls

Hyundai Motor America (Hyundai) is recalling certain 2006-2011 Hyundai Azera and 2006 Hyundai Sonata vehicles. Water may enter the Anti-lock Brake (ABS) Module and result in an electrical short .

An electrical short within the ABS Module may cause an engine compartment fire, even when the car is turned off, increasing the risk of an injury.

Hyundai will notify owners, and dealers will install a relay in the vehicle's main junction box to prevent the risk of an ABS short-circuit while the car is turned off, free of charge. The recall began on February 19, 2018. Owners may call Hyundai at 1-800-633-5151. Hyundai's number for this recall is 172.

HYUNDAI-KIA IS RECALLING 4,085 REPLACEMENT HEADLAMP ASSEMBLIES SOLD FOR USE ON 2006-2008 SONATA AND AZERA VEHICLES. THESE HEADLAMP ASSEMBLIES MAY NOT HAVE BEEN ALIGNED PROPERLY AND FAIL TO CONFORM TO THE PHOTOMETRIC REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

IMPROPER AIMING OF THE HEADLAMP MAY RESULT IN POOR VISIBILITY POSSIBLY RESULTING IN A VEHICLE CRASH.

HYUNDAI-KIA DEALERS HAVE BEEN NOTIFIED AND INSTRUCTED TO RETURN THEIR SUPPLY TO HYUNDAI MOTOR AMERICA. NONE OF THE HEADLAMPS WERE SOLD AS RETAIL. AS A RESULT, AN OWNER NOTIFICATION LETTER WILL NOT BE ISSUED.

Hyundai is recalling certain model year 2006-2010 Sonata vehicles manufactured March 1, 2005, through January 21, 2010; and model year 2006-2011 Azera vehicles manufactured September 27, 2005, through November 22, 2010 originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. Road salt and water can enter portions of the rear crossmember, leading to corrosion of the crossmember steel. This may lead to detachment of one of the rear control arms.

Control arm separation may suddenly change the rear wheel alignment, affecting the handling of the vehicle, increasing the risk of a crash.

Hyundai will notify owners, and dealers will repair or replace the crossmember assembly. The recall began on October 8, 2013. Owners may contact Hyundai Customer Care Center at 1-800-633-5151. Hyundai's recall number is 113.

HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2009 AZERA VEHICLES MANUFACTURED FROM SEPTEMBER 27, 2005, THROUGH OCTOBER 1, 2008. THE WIRING HARNESS FOR THE RIGHT FRONT SEAT BELT TENSION SENSOR MAY SUSTAIN DAMAGE AFTER REPEATED USE OF THE SEAT BELT. IF THE SEAT BELT TENSION SENSOR WIRING BECOMES DAMAGED THE AIR BAG WILL NOT DEPLOY IN THE EVENT OF A CRASH NECESSITATING FRONT AIR BAG DEPLOYMENT.

THE SEAT OCCUPANT IS AT AN INCREASED RISK OF INJURY SHOULD THE AIR BAG NOT DEPLOY AS INTENDED.

HYUNDAI WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 22, 2010. OWNERS MAY CONTACT HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.

HYUNDAI IS RECALLING 3,011 MODEL YEAR 2005-2007 ELANTRA, TUCSON, SONATA, AZERA AND ACCENT VEHICLES. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO FAIL TO ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A DEFECTIVE STOP LAMP SWITCH MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION WOULD NOT BE ABLE TO BE SHIFT OUT OF THE "PARK" POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.

ANY OF THESE MALFUNCTIONS COULD LEAD TO A CRASH.

DEALERS WILL REPLACE THE STOP LAMP SWITCH FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 2, 2009. OWNERS MAY CONTACT HYUNDAI OF PUERTO RICO CUSTOMER SERVICE AT 1-787-999-4310.

HYUNDAI DE PUERTO RICO IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2009 AZERA VEHICLES MANUFACTURED FROM SEPTEMBER 27, 2005, THROUGH OCTOBER 1, 2008. THE WIRING HARNESS FOR THE RIGHT FRONT SEAT BELT TENSION SENSOR MAY SUSTAIN DAMAGE AFTER REPEATED USE OF THE SEAT BELT. IF THE SEAT BELT TENSION SENSOR WIRING BECOMES DAMAGED THE AIR BAG WILL NOT DEPLOY IN THE EVENT OF A CRASH NECESSITATING FRONT AIR BAG DEPLOYMENT.

THE SEAT OCCUPANT IS AT AN INCREASED RISK OF INJURY SHOULD THE AIR BAG NOT DEPLOY AS INTENDED.

HYUNDAI WILL INSPECT AND REPLACE THE RIGHT FRONT SEAT BELT AND INSTALL A NEW SEAT BELT TENSION SENSOR WIRING HARNESS CLIP, IF NECESSARY, AND REROUTE THE RIGHT FRONT SEAT BELT TENSION SENSOR WIRING AND SECURE THE WIRING WITH A NEW HARNESS CLIP. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 8, 2010. OWNERS MAY CONTACT HYUNDAI DE PUERTO RICO 1-787-999-3333.