INTERNATIONAL HARVESTER8200
NHTSA vehicle recall lookup
1995 International Harvester 8200 recalls
There are 3 NHTSA recall campaigns associated with this vehicle configuration.
Live NHTSA dataVehicle taxonomy resolved as International Harvester 8200.
Most-mentioned components
STEERING:LINKAGES:TIE ROD ASSEMBLY · 1SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS · 1VEHICLE SPEED CONTROL:ACCELERATOR PEDAL · 1
Campaign 95E009002
Steering › Linkages › Tie Rod Assembly
Sep 5, 1995
Summary
DURING ASSEMBLY, THE TIE ROD END NUTS WERE NOT PROPERLY TORQUED. EXTREMELY LOW TORQUE CAN ALLOW MOVEMENT BEWEEN THE BALL STUD AND THE TIE ROD ARM CAUSING DAMAGE.
Risk
THIS CONDITION CAN AFFECT THE DRIVER'S ABILITY TOSTEER THE VEHICLE INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy
Open campaign page →
DEALERS WILL CHECK THE TORQUE ON THE BALL STUDS OF THE SUSPECT AXLES AND BRING THE TORQUE UP TO ROCKWELL'S SPECIFICATIONS.
Campaign 95V144000
Service Brakes, Hydraulic › Foundation Components › Hoses, Lines/Piping, And Fittings
Feb 8, 1995
Summary
THESE VEHICLES WERE BUILT WITH AN IMPROPERLY PLUMBED BRAKE SYSTEM WHICH AFFECTS THE BRAKING ON THE REAR AXLE WHEN RUNNING EITHER BOBTAIL OR PULLING A TRAILER.
Risk
THIS CONDITION CAN AFFECT THE STOPPING ABILITY OF THE VEHICLE BECAUSE THE FRONT STEER AXLE BRAKES AND TRAILER'S BRAKES WOULD BE DOING MOST OF THE BRAKING. INCREASED STOPPING DISTANCES WOULD BE REQUIRED CAUSING ACCELERATED WEAR ON THE STEER AXLE AND THE TRAILER BRAKES.
Remedy
Open campaign page →
NAVISTAR DEALERS WILL INSPECT VEHICLES AND REPAIR BY INSTALLING BRAKE LINES AND FITTINGS AS REQUIRED.
Campaign 94V196000
Vehicle Speed Control › Accelerator Pedal
Jul 10, 1994
Summary
THE BASE OF THE ELECTRONIC ACCELERATOR PEDAL IS MADE OF DIE CAST ALUMINUM. THE BASE MOUNTS DIRECTLY TO THE CAB FIREWALL. THE CAB FIREWALL IS NOT RIGID ENOUGH OR FLAT ENOUGH AT THE MOUNTING SURFACE, CAUSING STRESS ON THE ACCELERATOR BASE THAT WILL CAUSE THE MOUNTING PADS ON THE BASE OF THE PEDAL ASSEMBLY TO FAIL AND TOTALLY SEPARATE FROM THE FIREWALL.
Risk
THIS CAN CAUSE LOSS OF SPEED CONTROL, DRIVER DISTRACTION, AND RESULT IN AN ACCIDENT.
Remedy
Open campaign page →
DEALERS WILL INSPECT THE ACCELERATOR PEDAL ASSEMBLY AND INSTALL A PLATE BETWEEN THE ACCELERATOR MOUNTING BASE AND THE FIREWALL ON THOSE UNITS WHERE THE BASE IS NOT BROKEN AND HAS NO VISIBLE SIGNS OF A CRACK. IF THE BASE IS BROKEN OR CRACKED, THE ACCELERATOR ASSEMBLY WILL BE REPLACED WITH A NEW REDESIGNED ACCELERATOR PEDAL ASSEMBLY.
Does this mean my vehicle has an open recall?
No. Year/make/model results show campaigns associated with this vehicle configuration. RecallSight can decode your VIN and build the research dossier here; NHTSA remains authoritative for whether a specific VIN has an unrepaired recall.
Check a VIN on RecallSight →What should I do?
Review the remedy and manufacturer guidance for each campaign. Safety recall remedies are generally provided by manufacturers without charge when the vehicle is covered.
Model history
See every International Harvester 8200 model year
Browse all official vPIC model years, including years RecallSight has not indexed yet, then compare the evidence as each year is loaded.