SAAB9000
NHTSA vehicle recall lookup
1994 SAAB 9000 recalls
There are 4 NHTSA recall campaigns associated with this vehicle configuration.
Live NHTSA dataVehicle taxonomy resolved as SAAB 9000.
Most-mentioned components
EXTERIOR LIGHTING:BRAKE LIGHTS · 1SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE · 1AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE · 1ENGINE AND ENGINE COOLING:COOLING SYSTEM · 1
Campaign 94V084000
Exterior Lighting › Brake Lights
Feb 5, 1994
Summary
ONE OF THE BULBS IN EACH OF THE BRAKE LIGHT LOWER OUTBOARD LAMP ASSEMBLIES MAY NOT HAVE BEEN PROPERLY WIRED, RESULTING IN IMPROPER TAIL LIGHT ILLUMINATION ON BRAKE APPLICATION. THIS DOES NOT CONFORM TO THE REQUIREMENTS OF FMVSS NO 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Risk
CONSEQUENCE OF NON-COMPLIANCE: IMPROPER ILLUMINATION OF BRAKE LIGHTS DURING BRAKE APPLICATION MAY NOT SIGNAL FOLLOWING DRIVERS OF THE OPERATOR'S INTENT TO SLOW OR STOP AND COULD RESULT IN A VEHICLE COLLISION.
Remedy
Open campaign page →
DEALERS WILL MODIFY THE BRAKE LIGHT OUTBOARD LAMP ASSEMBLIES TO MEET FMVSS REQUIREMENTS.
Campaign 95V067000
Service Brakes, Hydraulic › Antilock/Traction Control/Electronic Limited Slip › Control Unit/Module
May 3, 1997
Summary
MOISTURE CAN FOLLOW THE ELECTRICAL HARNESS AND ENTER THE PRESSURE SWITCH CONNECTOR CAUSING CORROSION AND MALFUNCTION OF THE SWITCH.
Risk
THE CORROSION CAUSES A DETERIORATION OF THE ELECTRICALSWITCH CONNECTION AND CAN RESULT IN FALSE ILLUMINATION OF ABS AND/OR THE BRAKE WARNING LIGHTS AND/OR THE LOSS OF POWER ASSISTANCE BECAUSE OF NO HYDRAULIC PUMPOPERATION. LOSS OF POWER ASSIST INCREASES THE DRIVER'S BRAKE PEDAL EFFORT REQUIRED FOR STOPPING WHICH CAN RESULT IN EXTENDED BRAKING DISTANCES.
Remedy
Open campaign page →
DEALERS WILL INSPECT THE ELECTRICAL CONNECTIONS TO THE ABS PRESSURE SWITCH TERMINALS FOR CORROSION AND INSTALL A SHRINK HOSE TO THE WIRING HARNESS TO AVOID MOISTURE ENTERING THE CONNECTION. PRESSURE SWITCHES WITH CORRODED CONNECTORS WILL BE REPLACED.
Campaign 99V109000
Air Bags › Frontal › Sensor/Control Module-Inactive
Jun 5, 1999
Summary
VEHICLE DESCRIPTION: PASSENGER VEHICLES. MOISTURE CAN ENTER THE AIR BAG INFLATABLE RESTRAINT ELECTRONIC CONTROL MODULE (ECM) AND CAUSE CORROSION ON PORTIONS OF THE ECM PRINTER CIRCUIT BOARDS.
Risk
THIS CORROSION CAN POSSIBLY CREATE OPEN CONNECTIONS IN CIRCUITS WHICH CONTROL THE RESTRAINT DEPLOYMENT, POSSIBLY CAUSING INADVERTENT AIR BAG DEPLOYMENT.
Remedy
Open campaign page →
DEALERS WILL INSPECT THE EXTERIOR OF THE ECM. IF THERE IS NO INDICATION OF MOISTURE, A COVER WILL BE INSTALLED OVER THE ECM. IF THERE IS INDICATION OF MOISTURE, THE DEALER WILL REPLACE THE ECM AND INSTALL A COVER OVER THE NEW ECM.
Campaign 94V126000
Engine And Engine Cooling › Cooling System
Aug 7, 1994
Summary
DURING LOW ENERGY FRONTAL IMPACT COLLISIONS, THE FRONT CROSSMEMBER CAN CONTACT THE METAL TUBING PORTION OF THE COOLER HOSE ASSEMBLY; AND/OR THE HOSE ASSEMBLY CAN BREAK AND LEAK OIL ONTO THE HOT EXHAUST MANIFOLD OR THE TURBOCHARGER.
Risk
OIL LEAKING ON THESE HOT ENGINE SURFACES CAN IGNITE AND CAUSE A VEHICULAR FIRE.
Remedy
Open campaign page →
DEALERS WILL INSTALL A PROTECTIVE COVER WHICH WILL PROTECT THE COOLER AND HOSES FROM OTHER STRUCTURAL COMPONENTS IN LOW ENERGY FRONT IMPACTS.
Does this mean my vehicle has an open recall?
No. Year/make/model results show campaigns associated with this vehicle configuration. RecallSight can decode your VIN and build the research dossier here; NHTSA remains authoritative for whether a specific VIN has an unrepaired recall.
Check a VIN on RecallSight →What should I do?
Review the remedy and manufacturer guidance for each campaign. Safety recall remedies are generally provided by manufacturers without charge when the vehicle is covered.
Model history
See every SAAB 9000 model year
Browse all official vPIC model years, including years RecallSight has not indexed yet, then compare the evidence as each year is loaded.