1994 JEEP CHEROKEE recalls

U.S. DRIVE RIGHT IS RECALLING 107 MY 1994-1998 RIGHT HAND DRIVE, 4-WHEEL DRIVE JEEP CHEROKEE VEHICLES. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 101, 'CONTROLS AND DISPLAYS;' NO. 108, 'LAMPS, REFLECTIVE DEVICES AND ASSOCIATED EQUIPMENT;' NO. 111, 'REARVIEW MIRROR;' NO. 114, 'THEFT PROTECTION;' NO. 115, 'VEHICLE IDENTIFICATION NUMBER;' NO. 118, 'POWER WINDOW SYSTEM;' NO. 120, 'TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS;' NO. 208, 'OCCUPANT CRASH PROTECTION;' AND NO. 301, 'FUEL SYSTEM INTEGRITY.'

THESE VEHICLES DO NOT MEET THE REQUIRED STANDARDS.

U.S. DRIVE RIGHT WILL MAKE ALL THE REQUIRED MODIFICATIONS. A REPRESENTATIVE WILL TRAVEL TO THE CUSTOMER'S LOCATION AND MAKE THE MODIFICATIONS ON SITE. THE RECALL WILL BE PERFORMED ON A REGIONAL BASIS BEGINNING MARCH 2008. OWNERS MAY CONTACT U.S. DRIVE RIGHT AT 1-888-632-5936.

U.S. DRIVE RIGHT IS RECALLING CERTAIN MODEL YEAR 1994-1996 JEEP CHEROKEE VEHICLES IMPORTED FROM JANUARY 2007, THROUGH APRIL 2011 FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT," FOR THE HIGH MOUNT BRAKE LAMP ASSEMBLY. THE VEHICLES ARE NOT EQUIPPED WITH THE REQUIRED THIRD BRAKE LAMP.

INADEQUATE LIGHTING COULD REDUCE VISIBILITY OF VEHICLE, INCREASING THE RISK OF A CRASH.

U.S. DRIVE RIGHT WILL NOTIFY OWNERS AND MAIL KITS ALONG WITH INSTRUCTIONS TO HAVE THE VEHICLE REPAIRED BY A QUALIFIED MECHANIC OF THEIR CHOICE, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 12, 2011. OWNERS MAY CONTACT U.S. DRIVE RIGHT AT 1-888-632-5936.

DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.

DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.

SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.

SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.

CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.

PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.

VEHICLE DESCRIPTION: PASSENGER AND MULTI-PURPOSE VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, ILLINOIS, INDIANA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, OR WISCONSIN, AND THE DISTRICT OF COLUMBIA. THE FRONT DISC BRAKE ROTORS CAN EXPERIENCE SEVERE CORROSION IF OPERATED FOR AN EXTENSIVE PERIOD IN THE "SALT BELT." IF THE ROTORS ARE NOT REPLACED, THE CORROSION CAN EVENTUALLY COMPROMISE THE STRUCTURAL INTEGRITY OF THE STAMPED STEEL CENTER HUB SECTION OF THE ROTOR.

THE REDUCED STRENGTH CAN ALLOW THE CAST IRON WEAR SURFACE TO SEPARATE FROM THE HUB, REDUCING THE BRAKE EFFECTIVENESS OF THE VEHICLE.

DEALERS WILL REPLACE THESE ROTORS WITH ROTORS THAT ARE COATED WITH A CORROSION PROTECTION.

DURING ASSEMBLY OF THE FRAME, A FILLET WELD THAT JOINS THE INNER STEERING GEAR ATTACHMENT REINFORCEMENT TO THE FRAME RAIL, WAS OMITTED.

DUE TO HIGH STEERING LOAD EVENTS, VEHICLES CAN EXHIBIT BROKEN STEERING GEAR ATTACHING BOLTS OR FRAME RAIL CRACKING AT THE STEERING GEAR ATTACHING POINT INCREASING THE RISK OF A VEHICLE CRASH.

DEALERS WILL INSPECT THE VEHICLES FOR CRACKS IN THE FRAME RAIL. VEHICLES THAT SHOW CRACKS WILL BE EQUIPPED WITH REINFORCEMENT PLATES. VEHICLES THAT ARE FOUND TO BE FREE OF CRACKS WILL HAVE A SLOT CUT IN THE CROSS MEMBER AND THE FILLET WELD WILL BE ADDED.

THE TWO REAR INBOARD SAFETY BELT ATTACHMENT BOLTS MAY HAVE INADEQUATE THREAD ENGAGEMENT INTO THE FLOOR PAN ANCHOR NUTS.

THE SAFETY BELT ATTACHMENT BOLTS MAY NOT SUPPORT THELOAD OF REAR SEAT PASSENGERS IN THE EVENT OF A SUDDEN STOP OR ACCIDENT; THEASSEMBLY FAILS TO COMPLY WITH THE STATIC LOAD REQUIREMENTS OF FMVSS 210, "SEATBELT ASSEMBLY ANCHORAGES." THE INABILITY TO SUPPORT THE LOAD OF REAR SEATPASSENGERS INCREASES THE RISK OF INJURY TO SEAT OCCUPANTS.

REPLACE THE TWO INBOARD SAFETY BELT ANCHOR BOLTS WITH LONGER BOLTS ON ALL VEHICLES.

VEHICLE DESCRIPTION: MULTIPURPOSE PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS. THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH FEDERAL REGULATION 573. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. DRIVERS CAN MISTAKENLY STEP ON THE ACCELERATOR PEDAL WHEN THEY INTEND TO STEP ON THE BRAKE PEDAL.

PEDAL MISAPPLICATION BY A DRIVER CAN CAUSE UNINTENDED ACCELERATION.

DEALERS WILL INSTALL A SHIFT INTERLOCK ON THE AUTOMATIC TRANSMISSION OF THESE VEHICLES.