FLEETWOODBOUNDER
NHTSA vehicle recall lookup
1993 FLEETWOOD BOUNDER recalls
There are 3 NHTSA recall campaigns associated with this vehicle configuration.
Live NHTSA dataVehicle taxonomy resolved as FLEETWOOD BOUNDER.
Most-mentioned components
EQUIPMENT:MECHANICAL:INTEGRATED JACK/LEVELER/STABILIZER · 1VEHICLE SPEED CONTROL · 1FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS · 1
Campaign 94V003000
Equipment › Mechanical › Integrated Jack/Leveler/Stabilizer
Jun 10, 1994
Summary
THE LEVELING JACK HYDRAULIC HOSE LINES ARE ROUTED CLOSE TO THE ENGINE EXHAUST MANIFOLD. THIS CAN CAUSE THE HOSE TO MELT AND RESULT IN A HYDRAULIC FLUID LEAK ONTO THE EXHAUST MANIFOLD.
Risk
HYDRAULIC FLUID MAY DRIP ONTO THE HOT EXHAUST MANIFOLD AND IGNITE CAUSING A FIRE. ALSO, LOSS OF LEVELING JACK HYDRAULIC FLUID WOULD MAKE IT IMPOSSIBLE TO RAISE OR LOWER THE LEVELING JACKS.
Remedy
Open campaign page →
DEALERS WILL REPLACE AND RELOCATE THE AFFECTED HYDRAULIC LINE.
Campaign 93V076000
Vehicle Speed Control
Jun 4, 1995
Summary
WHILE OPERATING THE ENGINE IN REVERSE GEAR, ENGINE TORQUE CAUSES THE ENGINE TO ROLL, CAUSING THE THROTTLE MODULATOR CABLE ASSEMBLY TO CONTACT THE FLOOR AND BIND THE THROTTLE CABLE HOLDING THE THROTTLE IN AN OPEN POSITION.
Risk
THE THROTTLE CABLE BINDING WHILE THE THROTTLE IS IN ANOPEN POSITION CAUSES LOSS OF ENGINE SPEED CONTROL WHICH COULD RESULT IN ANACCIDENT.
Remedy
Open campaign page →
RELOCATION OF RAISED FLOOR SUPPORT HARDWARE ON THE BOX PORTION OF THE MOTORHOME.
Campaign 94V105000
Fuel System, Other › Delivery › Hoses, Lines/Piping, And Fittings
Sep 6, 1994
Summary
THE LIQUID PROPANE GAS (LPG) PIPES AT THE REAR OF THE VEHICLE ARE ROUTED SO THEY CONTACT THE TAG AXLE DURING VERTICAL MOVEMENT. THIS CONTACT CAN RUPTURE THE LPG PIPE AND ALLOW LPG LEAKAGE.
Risk
CONSEQUENCE OF NON-COMPLIANCE: WHEN A MIXTURE OF LPG GAS AND OXYGEN IS EXPOSED TO A SOURCE OF IGNITION, AN EXPLOSION CAN RESULT AND IGNITE SURROUNDING COMBUSTIBLE MATERIALS.
Remedy
Open campaign page →
DEALERS WILL INSTALL A SECTION OF COPPER TUBING IN THE REAR OF THE VEHICLE TO REPLACE IRON PIPING IN AN AREA OUT OF THE SCOPE OF THE AXLE SWING AREA.
Does this mean my vehicle has an open recall?
No. Year/make/model results show campaigns associated with this vehicle configuration. RecallSight can decode your VIN and build the research dossier here; NHTSA remains authoritative for whether a specific VIN has an unrepaired recall.
Check a VIN on RecallSight →What should I do?
Review the remedy and manufacturer guidance for each campaign. Safety recall remedies are generally provided by manufacturers without charge when the vehicle is covered.
Model history
See every FLEETWOOD BOUNDER model year
Browse all official vPIC model years, including years RecallSight has not indexed yet, then compare the evidence as each year is loaded.