1988 EAGLE PREMIER recalls

THE END CAP CONNECTING THE HEAT EXCHANGER'S CORE TO THE ENGINE COOLING SYSTEM COULD RUPTURE AND ALLOW HOT COOLANT TO ESCAPE INTO THE PASSENGER COMPARTMENT.

THE COOLANT ESCAPING INTO THE PASSENGER COMPARTMENT COULD CONTACT THE DRIVER'S FEET AND INJURE THE DRIVER. ALSO, STEAM FROM THE HEATER LIQUID WILL CLOUD ON THE WINDOW SURFACES AND IMPAIR THE DRIVER'S VISION. IN EITHER CASE, FAILURE OF THE HEATER CORE END CAP COULD RESULT IN A VEHICLE ACCIDENT.

A COOLANT TEMPERATURE CONTROLLED HEATER CORE FLUID BYPASS VALVE WILL BE INSTALLED.

ROUTING OF THE FRONT BRAKE HOSE MAY CAUSE EXCESSIVE HOSE FLEXING RESULTING IN PREMATURE FATIGUE CRACKING OF THE OUTER HOSE COVER.

THIS COULD LEAD TO HOSE FAILURE AND LOSS OF BRAKE FLUIDREDUCING BRAKING EFFECTIVENESS.

REPLACE FRONT BRAKE HOSES WITH HOSES REDESIGNED TO PROVIDE A MODIFIED ROUTING CONFIGURATION.

THE AUTOMATIC SHOULDER BELT SYSTEMS CAN MALFUNCTION AND BECOME INOPERATIVE.

THE LACK OF PASSIVE RESTRAINTS COULD INCREASE THE RISK OF PERSONAL INJURY IN THE EVENT OF A VEHICLE COLLISION.

DEALERS WILL REPLACE THE SYSTEM TRACK AND DRIVE ASSEMBLY ON AUTOMATIC SHOULDER BELT SYSTEMS WHICH ARE CURRENTLY INOPERATIVE AND THOSE SYSTEMS WHEN THEY BECOME INOPERATIVE IN THE FUTURE.

AUTOMATIC TRANSMISSIONS EXPERIENCED ENDURANCE FAILURES OF PARK MECHANISM COMPONENTS DURING SEVERE TESTING.

VEHICLES WOULD BE SUBJECT TO TRANSMISSION FAILURES.

RETROFIT TRANSMISSION.

VEHICLE DESCRIPTION: PASSENGER AND MULTI-PURPOSE VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, ILLINOIS, INDIANA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, OR WISCONSIN, AND THE DISTRICT OF COLUMBIA. THE FRONT DISC BRAKE ROTORS CAN EXPERIENCE SEVERE CORROSION IF OPERATED FOR AN EXTENSIVE PERIOD IN THE "SALT BELT." IF THE ROTORS ARE NOT REPLACED, THE CORROSION CAN EVENTUALLY COMPROMISE THE STRUCTURAL INTEGRITY OF THE STAMPED STEEL CENTER HUB SECTION OF THE ROTOR.

THE REDUCED STRENGTH CAN ALLOW THE CAST IRON WEAR SURFACE TO SEPARATE FROM THE HUB, REDUCING THE BRAKE EFFECTIVENESS OF THE VEHICLE.

DEALERS WILL REPLACE THESE ROTORS WITH ROTORS THAT ARE COATED WITH A CORROSION PROTECTION.

MASTER CYLINDER MAY HAVE BEEN MISASSEMBLED CAUSING A BLOCKED HYDRAULIC FLUID OUTLET PORT AND RESTRICTED FLUID FLOW.

THIS COULD RESULT IN INCREASED BRAKE PEDAL TRAVEL ANDPARTIAL LOSS OF BRAKING CAPABILITY.

REPLACE MASTER BRAKE CYLINDER.

COOLING SYSTEM PRESSURES DURING OVERHEATED ENGINE OPERATION MAY EXCEED THE STRENGTH CAPABILITY OF CERTAIN COMPONENTS DUE TO INADEQUATE VENTING CAPACITY OF THE SYSTEM PRESSURE CAP.

THE BUILDUP OF PRESSURE MAY CAUSE HEATER CORE TO RUPTUREAND DISCHARGE HOT COOLANT AND STEAM IN THE PROXIMITY OF THE DRIVERS LEGS.

REPLACE ALL COOLANT SYSTEM PRESSURE CAPS WITH ONE HAVING ADEQUATE VENTING CAPACITY.