FORDE150
NHTSA vehicle recall lookup
1979 Ford E150 recalls
There are 5 NHTSA recall campaigns associated with this vehicle configuration.
Live NHTSA dataVehicle taxonomy resolved as Ford E150.
Most-mentioned components
SEAT BELTS:FRONT:ANCHORAGE · 1STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS · 1SEAT BELTS:REAR/OTHER · 1WHEELS · 1SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES · 1
Campaign 90V137000
Seat Belts › Front › Anchorage
Jun 7, 1991
Risk
OCCUPANTS WOULD NOT BE ADEQUATELY PROTECTED IN EVENT OFAN ACCIDENT OR SUDDEN STOP.
Remedy
Open campaign page →
INSTALL PROPER MOUNTING HARDWARE AND SEAT BELTS.
Campaign 79V153000
Structure › Frame And Members › Underbody Shields
Jul 6, 1980
Summary
CERTAIN VEHICLES MAY NOT CONTAIN THE SPECIFIED BODY MOUNTED HEAT SHIELDS. THIS COULD CAUSE HIGH FLOOR PAN TEMPERATURES WHEN THE ENGINE IS IDLED FOR EXTENDED PERIODS OF TIME. FOULED SPARK PLUGS OR OTHER ENGINE CONDITIONS COULD FURTHER INCREASE EXHAUST TEMPERATURES.
Remedy
Open campaign page →
THE DEALER WILL INSTALL THE NECESSARY FRAME MOUNTED HEAT SHIELD, IF MISSING.
Campaign 78V214000
Seat Belts › Rear/Other
May 10, 1978
Summary
ON THE INVOLVED VEHICLES, THE POTENTIAL EXISTS FOR THE OUTBOARD SEAT BELTS TO BECOME TRAPPED IN THE SEAT-BED PIVOTING MECHANISM. SHOULD THE BELT BECOME TRAPPED IN THE MECHANISM WHEN THE SEAT IS CONVERTED TO A BED, THE BELT MAY BECOME CUT OR FRAYED.
Remedy
Open campaign page →
THE DEALER WILL INSTALL SEAT BELT SHIELDS ON THE FOLDING SEAT/BED PIVOTING MECHANISM AND REPLACE THE OUTBOARD SEAT BELT ASSEMBLIES IF DAMAGED, FREE OF CHARGE.
Campaign 79V185000
Wheels
Jul 8, 1979
Summary
THE WHEEL ASSEMBLY MAY CONTAIN SUBSTANDARD WELDS IN THE AREA WHERE THE DISC IS ATTACHED TO THE RIM. AS A RESULT, CRACKS CAN FORM IN THE WHEEL ASSEMBLY, CAUSING AIR LOSS AND AN UNDERINFLATED TIRE.
Remedy
Open campaign page →
DEALER WILL INSPECT AND REPLACE ANY DEFECTIVE WHEELS WITHOUT CHARGE TO OWNER.
Campaign 79V117000
Service Brakes, Hydraulic › Pedals And Linkages
Mar 5, 1980
Summary
THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.
Remedy
Open campaign page →
DEALER WILL REPLACE THE SUSPECT BRAKE RETAINING PIN.
Does this mean my vehicle has an open recall?
No. Year/make/model results show campaigns associated with this vehicle configuration. RecallSight can decode your VIN and build the research dossier here; NHTSA remains authoritative for whether a specific VIN has an unrepaired recall.
Check a VIN on RecallSight →What should I do?
Review the remedy and manufacturer guidance for each campaign. Safety recall remedies are generally provided by manufacturers without charge when the vehicle is covered.
Model history
See every Ford E150 model year
Browse all official vPIC model years, including years RecallSight has not indexed yet, then compare the evidence as each year is loaded.